Cutting the tenons

  • 03 Apr 2019 9:53 PM
    Message # 7259486
    Anonymous

    I just finished watching episode 23.  It's probably too late but my recommendation is to either cut the tenons by hand or use the bandsaw.  Trying to stand that board on edge and do a through cut will be very difficult even with a sled.  All you need is a straight cur for the first 1/8" of an inch.  After that nothing will be seen.  If the cut be straight the wedging action will close any tiny gap between the tenon and the through mortise.  

    SDH

E-Mail Support                                                                                                                                RobCosman.com

Rob Cosman's Signature Hand Tools




This site is maintained by AlphaOneStudios
Powered by Wild Apricot Membership Software